Drill Machines

Showing all products from Group drill machines

Pillar Drill Machine

Manufacturer, exporter and supplier of Drilling Machines. We offer PSL-40A
Autofeed model, PSL-40, PRL-40, Round head model in same size and
PSL-40X, Xtra Heavy model.

General Features

Main spindle and pinion made from EN steel by forging.
Column, arm, work-head & gears made from finest closed drain caster iron; while spindle ram trim alloy steel.
Main spindle run out is checked for accuracy as per IS 2199.
For the smooth sliding of sliding arm, special ‘Slide-reliever-slots’ are given.
All moving parts are fine-finished with grinding to a close tolerance.
International technical if ‘Taper wedge setting’. For complete slide-setting instead of normal one point setting.
Quality bearings with grease bath, so for permanent oiling.
Main gear and pulley are perfectly balanced.
Powder coated accessories for longer life and prevention of corrosion and pillage associated with usual chrome plating.

Specificaion Model No.	PSL-40X and PSL-40A*	PRL-40 and PSL-40	PRL-25	PS-25	PR-19
Tilting workig table	FIXED	FIXED	Upo 360*	FIXED	UPo360*
Sdrilling capacity	40 mm	40 mm	25 mm	25 mm	19 mm
Pillar Diameter	135 mm	121 mm	92 mm	92 mm	74.30 mm
Spindle nose to table distance	495 mm	595 mm	645 mm	660 mm	660 mm
disance from Spindle nose to base distance	1000 mm	1050 mm	1000 mm	1045 mm	900 mm
*Autofeed speed: (applies to PSL-40A only) 0.04 or 0.08
Distance from spindle center to pillar surface (in mm)	380(Max)	320 (Max.)	250(Max.)	250(Max.)	200(Max.)
Table travel	500 mm	480 mm	480 mm	480 mm	200 mm
taper in spindel	MT-4	MT-4	MT-3	MT-3	MT-2
number of speed	8 speed	8 speed	8 speed	8 speed	8 speed
Range of speed (RPM)	60 to2000	70 to 2000	70 to 2000	130 to2600	87 to 3224
Table size (in mm)	490x490	410x410	350 DIA.	330x330	260x260
Base size (m/c Area in mm)	820x490	440x715	255x310	365x575	480x300
Overall Base size (in mm)	825x495	445x720	425x670	370x580	490x310
Spindle travel	250 mm	250 mm	250 mm	180 mm	130 mm
Pillar Length	1475 mm	1450 mm	1400 mm	1410 mm	1170 mm
Overall hight with pulley guard	1840 mm	1860 mm	1780 mm	1730 mm	1420 mm
V-belt section	B-74'	B-59	B-51	B-52''	A-42''
Weight (Approx.)	500kg	325Kgs	250 kgs.	225 Kgs	100Kgs
Motor 1440RPM 3 Phase 440 Volts	2H.P.	1.5 H.P	1 H.P.	1 H.P.	0.5 H.P.
Shipping wooden case inner size LxWxH	1200x540x1860 mm	860x460x1580 mm	690x460x1550 mm	660x450x1770 mm	660x380x1440 mm

	Model Code System P = Pillar Drill m/c 19/25/40 = Drilling capacity S = Square Head Model R = Round Head Model L = Long Spindle Travel A = Autofeed Model X = Xtra Heavy Model
Std. Accessory : Motor Pulley Tapper Drift Manual Book Drill-bit angle gauge

Fully equipped with precision machinery:

The company established before three decades, believes in to being self reliant in all aspects of production. Today it is one of the well equipped se-up to bring out the best Drill Machines, India can offer. The company has a strategic location in Bhavnagar with a large manufacturing floor, R&D and marketing departments. All our machineries and precision instruments are of high standards of manufacturing,

Ensuring quality of our drills and your product:

Over the period, ‘P.Parmar’ has achieved unbeatable standards in designing the engineering parts, sure-n-smooth working of drilling processes and the finished results on your end-products. We never cut corners in raw material procurement or in achieving the utmost perfection. That shows on our products and finally in your products, too!

Expertise that never let you down:
Managed by highly experienced technocrat, the company has team of trained engineers assuring the quality at various stage of manufacturing. The technology and technics are upgraded every now and then with ongoig research and developmental activities. Your ‘P.Parmar’ Drill will always keep working with minimum maintenance. That’s promise.

Inquiry Details

Radial Drill Machine

Model R-25 (Multi-functional drill of 25mm)

This model offers straight & cross hole drilling in all degrees, plus milling and slitting function as well. At an economy of installation R-25 proves o be a beneficial deal.

Model R-40 (40 mm drill, suitable for most jobs)

Beside small conventional jobs, R-40 can execute big and odd size jobs as well. Its multi functionality is capable of accommodating your future needs of drilling.

General Features

Main spindle and pinion are made from EN 8-D steel by forging for roburst structural strength.
Column, arm, work head &gears are made from finest closed grain cast iron; while spindle Ram is made out of Alloy steel.
Main spindle run out is checked for accuracy as per IS 2199, prescribed standards.
For the smooth sliding movement of sliding arm over the main body, special ‘slide-reliever-slots’ are given to rule-out friction and indentation.
All moving parts are fine-finished with grinding to a close tolerance, hightening the overall m/c performance.
International technic of ‘Taper wedge setting’ this gives you complete slide setting instead of normal one point setting.
Quality bearing with grease bath, so that day-today oiling is not required.
Main gear and pulley are perfectly balanced, prior to assembly
Powder coated standard accessories for better functioning, longer life and to prevent corrosion and pillage associated with usual chrome plated accessories
Machined ‘T’ slots on working table for precision holding of the jobs

Specifications	R-25	R-40 & R40-A
Drilling capacity	25 mm	40 mm
Pillar diameter	130 mm	170 mm
Spindle nose to table distance	675 mm	705 mm
Distance from spindle nose to base distance	875 mm	995 mm
Distance from spindle center to pillar surface	635 mm(MAX)	790 mm(MAX)
Taper in spindle	MT-3	MT-4
Number of speed	8 speed	8 speed
Range of speed (RPM)	130 to 2600	70 to 2000
Work table size (in mm)	200x200x255	290x290x375
Base size (Machined Area)	585x915 mm	735x1240 mm
Overall Base Size	610x940 mm	745x1260 mm
Spindle travel	185 mm	215 mm
Pillar Lengh	1265 mm	1490 mm
Overall hight wih puley guard	1700 mm	1960 mm
V-Belt section	B-43'' & A-23''	B-45'' & A-24''
Weight (Approx)	475 Kgs.	800 Kgs.
Motor 1440RPM 3Phase 440 volts	1HP & 0.5HP	1.5 HP & 0.5 HP
Shipping Wooden Case Inner Size LxWxH(in mm)	1030x770x1770	1300x640x2100

Model R-40A (Autofeed)
Ultimate Precision with automation

Though all these ‘Radial’ models are precision machines, the autofeed function of this model makes the drilling automatic and thus eliminates human error from the process. All other featurse are same, as of R-40 model.

Std. Accessory
Motor Pulley
Tapper Drift
Manual Book
Drill-bit angle gauge

Fully equipped with precision machinery:

Ensuring quality of our drills and your product :

Over the period, ‘P.Parmar’ has achieved unbeatable standards in designing engineering parts, sure-n-smooth working of drilling processes and the finished results on your end-products. We never cut corners in raw material procurement in achieving the utmost perfection. That show on our products and finally in your products, too!