Products

 
pillar drill machine

Pillar Drill Machine

Manufacturer, exporter and supplier of Drilling Machines. We offer PSL-40A
Autofeed model, PSL-40, PRL-40, Round head model in same size and
PSL-40X, Xtra Heavy model.

 

General Features

 

  • Main spindle and pinion made from EN steel by forging.

  • Column, arm, work-head & gears made from finest closed drain caster iron; while spindle ram trim alloy steel.

  • Main spindle run out is checked for accuracy as per IS 2199.

  • For the smooth sliding of sliding arm, special ‘Slide-reliever-slots’  are given.

  • All moving parts are fine-finished with grinding to a close tolerance.

  • International  technical if ‘Taper wedge setting’. For complete slide-setting instead of normal one point setting.

  • Quality bearings with grease bath, so for permanent oiling.

  • Main gear and pulley are perfectly balanced.

  • Powder coated accessories for longer life and prevention of corrosion and pillage associated with usual chrome plating.

 

 

Specificaion  Model No. PSL-40X and PSL-40A* PRL-40 and PSL-40 PRL-25 PS-25 PR-19
Tilting workig table FIXED FIXED Upo 360* FIXED UPo360*
Sdrilling capacity 40 mm 40 mm 25 mm 25 mm 19 mm
Pillar Diameter 135 mm 121 mm 92 mm 92 mm 74.30 mm
Spindle nose to table distance 495 mm 595 mm 645 mm 660 mm 660 mm
disance from Spindle nose to base distance 1000 mm 1050 mm 1000 mm 1045 mm 900 mm
*Autofeed speed: (applies to PSL-40A only) 0.04 or 0.08
Distance from spindle center to pillar surface (in mm) 380(Max) 320 (Max.) 250(Max.) 250(Max.) 200(Max.)
Table travel 500 mm 480 mm 480 mm 480 mm 200 mm
taper in spindel  MT-4 MT-4 MT-3 MT-3 MT-2
number of speed 8 speed 8 speed 8 speed 8 speed 8 speed
Range of speed (RPM) 60 to2000 70 to 2000 70 to 2000 130 to2600 87 to 3224
Table size (in mm) 490x490 410x410 350 DIA. 330x330 260x260
Base size (m/c Area in mm) 820x490 440x715 255x310 365x575 480x300
Overall Base size (in mm)  825x495 445x720 425x670 370x580 490x310
Spindle travel 250 mm 250 mm 250 mm 180 mm 130 mm
Pillar Length 1475 mm 1450 mm 1400 mm 1410 mm 1170 mm
Overall hight with pulley guard 1840 mm 1860 mm 1780 mm 1730 mm 1420 mm
V-belt section B-74' B-59 B-51 B-52'' A-42''
Weight (Approx.) 500kg 325Kgs 250 kgs. 225 Kgs 100Kgs
Motor 1440RPM 3 Phase 440 Volts 2H.P. 1.5 H.P 1 H.P. 1 H.P. 0.5 H.P.
Shipping wooden case inner size LxWxH 1200x540x1860 mm 860x460x1580 mm 690x460x1550 mm 660x450x1770 mm 660x380x1440 mm

 

 

Model Code System
P = Pillar Drill m/c
19/25/40 = Drilling capacity
S = Square Head Model
R = Round Head Model
L = Long Spindle Travel
A = Autofeed Model
X = Xtra Heavy Model
Std. Accessory :

Motor Pulley       Tapper Drift       Manual Book         Drill-bit angle gauge

 

 

 

 
Fully equipped with precision machinery:

The company established before three decades, believes in to being self reliant in all aspects of production. Today it is one of the well equipped se-up to bring out the best Drill Machines, India can offer. The company has a strategic location in Bhavnagar with a large manufacturing floor, R&D and marketing departments. All our machineries and precision instruments are of high standards of manufacturing,
 
 
 
 
 
 
 
Ensuring quality of our drills and your product:

 Over the period, ‘P.Parmar’ has achieved unbeatable standards in designing the engineering parts, sure-n-smooth working of drilling processes and the finished results on your end-products. We never cut corners in raw material procurement or in achieving the utmost perfection. That shows on our products and finally in your products, too!
 
 
 
 
 
Expertise that never let you down:
Managed by highly experienced technocrat, the company has team of trained engineers assuring the quality at various stage of manufacturing. The technology and technics are upgraded every now and then with ongoig research and developmental activities. Your ‘P.Parmar’ Drill will always keep working with minimum maintenance. That’s promise.

 

Inquiry Details
radial drill machine

Radial Drill Machine

Model R-25 (Multi-functional drill of 25mm)

This model offers straight & cross hole drilling in all degrees, plus milling and slitting function as well. At an economy of installation R-25 proves o be a beneficial deal.
 
Model R-40 (40 mm drill, suitable for most jobs)

Beside small conventional jobs, R-40 can execute big and odd size jobs as well. Its multi functionality is capable of accommodating your future needs of drilling.
 
 
 
 
General Features

 

  • Main spindle and pinion are made from EN 8-D steel by forging for roburst structural strength.
  • Column, arm, work head &gears are made from finest closed grain cast iron; while spindle Ram is made out of Alloy steel.
  • Main spindle run out is checked for accuracy as per IS 2199, prescribed standards.
  • For the smooth sliding movement of sliding arm over the main body, special ‘slide-reliever-slots’ are given to rule-out friction and indentation.
  • All moving parts are fine-finished with grinding to a close tolerance, hightening the overall m/c performance.
  • International technic of ‘Taper wedge setting’ this gives you complete slide setting instead of normal one point setting.
  • Quality bearing with grease bath, so that day-today oiling is not required.
  • Main gear and pulley are perfectly balanced, prior to assembly
  • Powder coated standard accessories for better functioning, longer life and to prevent corrosion and pillage associated with usual chrome plated accessories
  • Machined ‘T’ slots on working table for precision holding of the jobs

 

Specifications R-25 R-40 & R40-A
  Drilling capacity 25 mm 40 mm
  Pillar diameter  130 mm 170 mm
  Spindle nose to table distance 675 mm 705 mm
  Distance from spindle nose to base distance 875 mm 995 mm
  Distance from spindle center to pillar surface 635 mm(MAX) 790 mm(MAX)
  Taper in spindle MT-3 MT-4
  Number of speed 8 speed  8 speed
  Range of speed (RPM) 130 to 2600 70 to 2000
  Work table size (in mm) 200x200x255 290x290x375
  Base size (Machined Area) 585x915 mm 735x1240 mm
  Overall Base Size 610x940 mm 745x1260 mm
  Spindle travel  185 mm 215 mm
  Pillar Lengh 1265 mm 1490 mm
  Overall  hight wih puley guard 1700 mm 1960 mm
  V-Belt section B-43'' & A-23'' B-45'' &  A-24''
  Weight (Approx) 475 Kgs. 800 Kgs.
  Motor 1440RPM 3Phase 440 volts 1HP & 0.5HP 1.5 HP & 0.5 HP
  Shipping Wooden Case Inner Size LxWxH(in mm) 1030x770x1770 1300x640x2100

 

 

Model R-40A (Autofeed)
Ultimate Precision with automation


Though all these ‘Radial’ models are precision machines, the autofeed function of this model makes the drilling automatic and thus eliminates human error from the process. All other featurse are same, as of R-40 model.

 

Std. Accessory
Motor Pulley
Tapper Drift
Manual Book
Drill-bit angle gauge

 

 

 

Fully equipped with precision machinery:

The company established before three decades, believes in to being self reliant in all aspects of production. Today it is one of the well equipped se-up to bring out the best Drill Machines, India can offer. The company has a strategic location in Bhavnagar with a large manufacturing floor, R&D and marketing departments. All our machineries and precision instruments are of high manufacturing, standards.
 
 
 
 
 
 
Ensuring quality of our drills and your product :

 Over the period, ‘P.Parmar’ has achieved unbeatable standards in designing engineering parts, sure-n-smooth working of drilling processes and the finished results on your end-products. We never cut corners in raw material procurement in achieving the utmost perfection. That show on our products and finally in your products, too!
 
 
 
 
 
 
Expertise that never let you down:
Managed by highly experienced technocrat, the company has team of trained engineers assuring the quality at various stage of manufacturing. The technology and technics are upgraded every now and then with ongoig research and developmental activities. Your ‘P.Parmar’ Drill will always keep working with minimum maintenance. That’s promise

 

Inquiry Details
lathe machine

Lathe Machine

We manufacture, supplies and export lathe machine, Light Duty Lathe Machine, Heavy Duty Lathe Machine and more

 

Std.Accessories
Chuck Plate Chaingear Set (Inch & mm)
Tool Post Key 2 Nos.-Deadcenter
01-Nos. sleeve Adaptor Motor PullyS
R/F Switch & Fitting  

 

 

Size 4' 6'' 5' 3'' 6'
  Length of Bed 1370 (4'6") 1600(5' 3'') 1825 (6')
  Width of Bed 240 240 24
  Hight of Center 175 175 175
  Swing over Center Slide 210 210 210
  Swing over Bed 350 350 350
  Swing in Gap 525 525 525
  Admit Between Center 725 940 1170
  Spindle Bore 38 38 38
  Approx Weight 500 Kg. 550 Kg. 625 Kg.
  No. of Spindle Speed 8/30 to 750 RPM
  Threading Range 0.5 TO 7 mm /4 TO TPI
  Tail Stock Spindle Travel 125
  Tail Stock Tapper MT-3
  Leadins Screw Dia./Threads 25/4TPI
  Electric Motor/Spped 1 H.P /1440 RPM/62 PULLY

 

 

Std.Accessories
Chuck Plate Chaingear Set (Inch & mm)
Tool Post Key 2 Nos.-Deadcenter
01-Nos. sleeve Adaptor Motor PullyS
R/F Switch & Fitting  

 

 

Size 4' 6'' 5' 3'' 6' 7'
  Length of Bed 1370 (4' 6'') 1600  (5' 3'') 1825 (6') 2125 (7')
  Width of Bed 280 280 280 280
  Height of Center  225 225 225 225
  Swing over Center Slide 425 425 425 425
  Swing over Bed 270 270 270 270
  Swing in Gap 650 650 650 650
  Admit Between Center 550 850 1000 1305
  Spindle Bore 52 52 52 52
  Approx Weight 650 Kg. 700 Kg. 750 Kg. 850 Kg.
  No. of Spindle Speed 6/46 To 570 RPM
  Threading Range 4 TO 48 TPI / 0.5 TO 7mm
  Tail Stock Spindle ravel 150
  Tail Stock Tapper MT-4
  Leadins Screw Dia./Threds 32/4TPI
  Electric Motor/ Speed 1.5 H.P./1440 RPM / 62Pully

 

 

Std.Accessories
Chuck Plate Chaingear Set (Inch & mm)
Tool Post Key 2 Nos.-Deadcenter
01-Nos. sleeve Motor PullyS
Face Plate Steady Rest

 

 

SIZE 5' 6'' 7' 9' 10' 12'
  Length of Bed 1675 (5' 6'') 2135 (7') 2745 (9') 3048 (10') 3660 (12')
  Width of Bed 324 324 324 324 324
  Height of Bed 254 254 254 254 254
  Swing over Center Slide 455 455 455 455 455
  Swing over Bed 255 255 255 255 255
  Swing in Gap 725 725 725 725 725
  Admit Between Center 555 965 1575 1880 2490
  Spindle Bore 54 54 54 54 54
  Approx Weight 1200Kg. 1325Kg. 1450Kg. 1600Kg. 1800Kg.
  No. Of Spindle Speed 8/30 to 495 RPM
  Threading Range 2 TO 24 TPI / 1 TO6 MM
  Tail Stock Ram Travel 175
  Tail Stock Tapper MT-4
  Leadins Screw   Dia./hreads 32/4TPI
  Lead Screw Dia. 38
  Electric Motor /Speed 2 HP/1440RPM/75 mm Motor Pully

 

 

PRECISE ACCURATE, PRODUCTIVE, ECONOMIC & HEAVY DUY LAHES
STANDARD EQUIPMENT WIH THE MACHINE
Steady Rest 1 No
Follow Rest 1 No
Face Plate 1 No
A Se of Change Wheel Gears  
EXTRA ACCESSORIES AT EXTRA COST
Four Jaw Chuck Moor Starer & Fitting
True Chuck Coolant Pump
Revolving Center Grinding Attachmenet

 

 

SPECIFICATIONS
L of Bed 6' 8' 8' 10' 10' 12' 12' 12' 14' 16' 20'
Width of Bed 15'' 15'' 16'' 16'' 18'' 18'' 20'' 22'' 22'' 22'' 26''
Center High 121/2'' 13'' 14'' 14'' 16'' 16'' 18'' 20'' 20'' 20'' 24''
Spindle Bore 2.5/8'' 2.5/8'' 3.1/8'' 3.1/8'' 3.5/8'' 3.5/8 4.1/8'' 4.1/8'' 4.1/8'' 4.1/8'' 4.1/8''
Swing Over Cap 24'' 24'' 28'' 28'' 32'' 32'' 36'' 40'' 40'' 40'' 48''
Swing in Gap 36'' 36'' 42'' 42'' 48'' 48'' 54'' 60'' 60'' 60'' 64''
Admit Between Center 3' 4.9' 4.9' 6.9' 6' 8' 8' 8' 10' 12' 16'
NO. of Spindle bSpeed 8 8 8 8 8 8 8 8 8 8 8
Lead Screw Dia 1.2/3'' 1.2.8'' 13/4'' 13/4'' 2'' 2'' 2'' 21/2'' 21/2'' 21/2'' 21/2''
H.P. Riquired 1 2 2 2 3 3 3 5 5 5 5

 

Inquiry Details
bandsaw machine

Bandsaw Machine

"Perfect Choice For Perfect Cutting"

 

Special Feature

 

  • It can Cuts Round Bars, Square, Flas,Pipes,Angles, Channels & Structural Steel.
  • It can cut various type of maerials like Mild Steel Stainless Steel, Brass, Copper, Aluminium etc.
  • There is efficient Clamping Vice.
  • It has precise & easy feed control.
  • You can get fast & smooth cutting.
  • Bi-metal cutting blade has optimum working capacity.

 

 

Technical Specifications

 

MODEL SM 175 SM 200 SM 300 SM 350 SM 400
Cutting Capacity          
Round bar mm 175 200 300 350 400
Square mm 150x150 175x175 250x250 200x300 350x350
Blade Size mm   3000x27x0.9 3000x27x0.9 3760x27x0.9 4100x34x1.1 4420x34x1.1
Motor Power Require 1 HP/1440RPM 1 HP/1440 RPM 2 HP/960RPM 2HP/960 RPM 2 HP/960 RPM
Coolant Pump Power Require 0.15 HP/2800 RPM 0.15 HP/2800 RPM 0.15 HP/2800 RPM 0.15 HP/2800 RPM 0.15 HP/2800 RPM
Blade Speed Mr/Min. 37-52-70 22-37-55-75 22-37-55-75 22-37-55-75 22-37-55-75
Net Weight in kg 310 340 780 850 925
Over all Dimensions LxWxH 1.58X0.58X0.95 2X0.85X1 2.4X0.85X1.2 2.6X0.9X1.2 2.7X0.9X1.2

 

 

Inquiry Details
welding machine

Welding Machine

"Premier Solution for Welding"

‘’Jagdish’’ forced air cooled, welding Rectifiers, Deigned to provide DC welding current. They are built using state-of-the-art solid state technology to meet the stringent demands of high quality welding from today’s fabrication industries including power plants, chemical process plans offshore works steel plans thermal power plants, mining and structural fabrications etc.

 

‘Jagdish’ also manufactures moving coil type D.C rectifiers too the machines are available in fully copper winding and aluminium winding too.

 

  • QUICK FACILITY
  • REMOT CONTROL UNIT
  • SABLE ARC WITH EASY DOROPLET TRANSFER
  • SUPER WELDING PERFORMANCE
  • RELIABLE AND RPICAL DESIGN

 

 

SALIENT DESIGN

TRANSFORMER :
Low leakage (High linkage) design, proper cooling and insulation including winding impregnation to enhance reliability and service life.

CURRENT CONTROL :
Current setting from min. to max. value can be done by 6 position off load tap switch.

TIME CONROL :
Solid state Electronic time o control weld time from 5 to 50 cycles and 1 to 10 seconds to achieve accurate and repeatable spots.

WELD PRESSURE :
Adjustable max. pressure levels are derived from a heavy-duty compression spring mounted on a pressure rod with calibrated nut. Here a special arrangement in the machine-minimises operator fatigue and ensures simple setting.

COOLING :
Electrodes holders and arms are provided with water cooling arrangement with hose connections. (Water supply to be arranged by the user).

ELECTRODES :
One pair of Morse Taper 2 straight electrodes made from hardened copper-alloy is supplied with the equipment. Other types or spare electrodes can be supplied on specific orders.

GENERAL DESIGN :
“”JAGDISH’’ Pedal operated rocker arm spot welding machines are offered in 6, 8, 10, 15, 20 and 25 KVA models each three standard throat depths to cover practically all applications.

All machines are made of steel fabricated rigid structures o eliminate the minutes spot deflections.
 
 
 
 
 
MODEL Unit JSW-6 JSW-8 JSW-10 JSW-15 JSW-20
Rating @ 50%Duty cycle KVA 6 8 10 15 20
Nominal Throat Clearance mm 250 250 250 250 250
Throt depth mm 200
300
400		 300
400
500		 300
400
500		 300
400
500		 300
Welding Range  - - - - - -
Mild Steel Max.2x mm 2.0
1.6
1.0		 2.5
2.0
1.25		 3.0
2.5
1.5		 3.5
3.0
1.0		 3.25
Sheet Thikness Min.2x mm 0.3
0.25
0.1		 0.35
0.3
0.2		 0.4
0.3
0.2		 0.6
0.5
0.1		 0.5
Brass Sheet Max.2x mm 0.8
0.7
0.45		 1.0
0.9
0.6		 1.2
1.1
0.75

2.0
1.5
0.9

 1.6
Thickness min.2x mm 0.17
0.1
0.08		 0.2
0.1
0.08		 0.25
0.2
0.12		 0.3
0.2
0.1		 0.2
Stainless steel Max.2x mm 1.6
1.4
0.8		 2.0
1.8
1.0		 2.4
2.2
1.2  		 3.0
2.4
0.9		 3
Sheet Thiknes Min.2x mm 0.25
0.2
0.12		 0.3
0.25
0.15		 0.32
0.28
0.18		 0.4
0.3
0.1		 0.3
Max. Available short ckt. Current KA Primary Supply Voltage 6.5 6 
5.5 
8		 7.5
7
8.5		 7.5
6
11		 10
8
-		  
V 230/415 230/415 230/415 230/415 415
Phase   1-2 1-2 1-2 1-2 2-3
Normal Electrode Force (Approx) Kg. 150
100
75		 150
100
75		 150
100
75		 150
100
60		 100
Max. Electrode Stock Mm 70 70 70 70 70
External Water supply at max. Temp.30*c Lit/min. 3 3 3 5 5
Size of mains Supply Copper cable Mm2 8 10 12 15 20
Recommended Swtch Raing Amps 30 30 30 30 30
Delayed Action fuse Rating Amps 20 20 20 30 30
- Hmm 1145 1145 1145 1145 1145
Approx. Dimensions Without Arm Lmm 455 455 455 455 455
- Wmm 330 330 330 330 330
Approx.Weight Without Arm Kgs. 105 125 142 147 155

 

Inquiry Details
air compressors

Air Compressors

We offers Air Compressors, Screw Compressors, Vacuum Pumps, Borewell Pumps , After Cooler, Air Dryer, Air Receiver, On line Filter  and Industrial Machines

 

 Optional Accessories Standard Accessories (with Receiver)
DRIVE-ELECTRONIC MOTOR/ENGINE DRIVEN SAFETY VALVE
REGULATION-CONSTANT SPEED/DUAL CONTROL SERVICE VALVE
BASE PLATE NOUNTED COMPRESSOR DRAIN VALVE
AIR DRYER-REFRIGERATED/HEATLESS PRESSURE GAUGE
AUTOMATIC CONDENSATE DRAIN VALVE PRESSURE CONTROL SWITCH
ONLINE FILTERS, ELECTRIC STARTERS V-BELT
AIR / WATER COOLED AFTER COOLERS BELT GUARD
VERTICAL AIR RECEIVERS MOTOR PULLEY
  MOTOR SLIDE RAIL ETC.

 

 

Single Stage Compressors

 

Model No. Motor HP No.of PISTON Pressure PSIG Piston Displacment CFM Reveiver LITRES
GC-05S 0.5 1 150 2 25
GC-05S 0.5 1 150 2 45
GC-101 1 1 150 3.2 70
GC-102 1 2 150 4 70
GC-151 1.5 1 150 4.5 70
GC-201 2 1 150 6 135
GC-202 2 2 150 6.2 135
GC-285EL 3 2 100 9 160
GC-285EL 3 2 100 13.2 160
GC-294 5.0/7.5 2 80 24.0/31.0 200
GC-305 7.5/10.0 2 60 47.6.52.0 240
GC-57S2 12.5/15.0 2 40 65.8/88.0 300
GC-65S2 15.0/20.0 3 40 99.0/132.0 500
GC-65S2D 30.0/40.0 3+3 40 198.0/264.0 750

 

 

Two / Multi Stage High Pressure Compressors

 

Model No. Motor HP No.of PISTON Pressure PSIG Piston Displacment CFM Reveiver LITRES
GC-284 2.0/3.0 2 200 6.7/9.8 160
GC-2390 3.0/5.0 2 200 8.9/11.0 160
GC-292 5.0/7.5 2 200 14.0/19.0 200
GCIT50 5.0/7.5 2 150 14.3/19.0 200
GC-2525 5.0/7.5 2 200 17.3/22.0 200
GCIT-100 7.5/10.0 2 150 22.5/30.0 300
GC-303 7.5/10.0 2 200 23.8/31.8 240
GC-2595 7.5/10.0 2 200 29.8/37.8 240
GC-121T2 10.0/12.5 2 200 32.9/44.0 300
GC-7150 12.5/15.0 2 200 55.0/60.5 300
GCIT-100D 15.0/20.0 2+2 150 45.0/60.0 500
GC-65T 15.0/20.0 3 200 54.4/81.8 500
GC-75T 20.0/25.0 3 150 65.8/98.7 500
GC-3050 25.0/40.0 3 150 85.8/112.0 500
GC-65TD 30.0/40.0 3+3 150 110.0/145.0 750
GC-75TD 40.0/50.0 3+3 150 132.0/166.0 750
GC-281 3 2 500 7.4 -
GC-301 5 2 500 10.8 -
GC-57T2 7.5 2 500 24.7 -
GC-65T2 15 3 1000 41.3 -

 

Inquiry Details
jumbo grinder machine

Jumbo Grinder Machine

 

Jumbo

 

CAPACITY - PH 2040 PH 2060 PH 2448 PH 2460
Max. Table Size mm 500x1000 500x1500 600x1200 600x1500
Max. Longitudinal Travel mm 1075 1575 1275 1575
Max. Cross Traverse mm 550 550 650 650
Max.Spindle Center Hight above Table mm 750 750 750 750

 

 

SPEED AND FEEDS
Max.able Speed m/min 18 18 18 18
Power Cross Traverse mm/min 1000 1000 1000 1000
Auto Cross Feed at each Table reversal - - - - -
infiniely variable) mm/min 0.5 to 10 0.5 to 10 0.5 to 10 0.5 to 10
Leas Count of Vertical feed head wheel mm/min 0.002 0.002 0.002 0.002

 

 

GRINDING HEAD
Size Of Grinding Wheel mm 300x50x76.2 300x50x76.2 300x50x76.2 300x50x76.2
Power Of Spindle Motor HP 5 5 5 5
Speed Of grinding spindle RPM 1400 1400 1400 1400

 

 

HYDRAULIC SYSTEM
Working Pressure Kg/cg 20 20 20 20
Motor HP. 5 5 5 5
Tank Capacity Lrs. 150 150 150 150

 

 

GENERAL
Machine Hight mm 2150 2150 2150 2150
Floor Space mm 2900x2100 3850x2100 3300x2300 3850x2300
Net Weight kg 5500 6500 6500 7000

 

 

 

  • The working table executes only longitudinal movements, This ensures full contact and support from the machine bed, even in the table limit position. Vend flat guide ways are laminated with Trite 'B' to guarantee smooth table movement regardless of the load on the table.
  • The column carries out only cross feed movement, this guarantees uniform contact between the column slide and machine bed in any column position. The column slide is guided by box type Trite 'B' lamented ways. hand scraped to obtain smooth stick slip free movements.
  • Vertical slide ways and the grinding wheel, creating a perfectly perpendicular movement of  the spindle in relation to the working table, The housing construction is also designed for better rigidity.
  • The cartridge type spindle is supported by class 7  supper (CP4) precision angular contact ball bearings, preloaded and select-fitted into spindle cartridge. This will guarantee a maximum run out of 0.002mm for stable and accurate grinding m all the spindles are assembled at prayosha skilled and experienced technician in temperature-controlled clean room. The result is a spindle that will provide years of trouble-free service with minimum temperature changes, noise or vibration.

 

 

 

Inquiry Details
supreme grinder machine

Supreme Grinder Machine

 

 

CAPCITY - PH 1224 PH 1230 PH 1240 PH 1632
Max.Table Size mm 300x600 300x750 300x1000 400x800
Max.Longiudinal Travel mm 675 825 1075 875
Max. Cross Traverse mm 350 350 350 450
max.spindle Center Hight above table mm 750 750 750 750

 

 

SPEED AND FEEDS
Max.Table Speed m/min. 18 18 18 18
Power cross Traverse min. 1000 1000 1000 1000
Auto Cross Feed a each Table reversal - - - - -
(infinitely variable) mm 0.5 to 10 0.5 to 10 0.5 to 10 0.5 to 10
Least Count of vertical feed head wheel mm 0.002 0.002 0.002 0.002

 

 

GRINDER HEAD
Size of Grinder wheel mm 250x25x76.2 250x25x76.2 250x25x76.2 300x50x76.2 300x50x76.2
Power of spindle motor HP 3 3 3 5 5
speed of grinding spindle RPM 2800 2800 2800 1400 1400

 

 

HYDRAULIC SYSTEM
Working Pressure kg/cm 20 20 20 20 20
Motor hP 2 2 2 2 2
Tank capacity Lrs. 75 75 75 75 75

 

 

GENERAL
Machine height mm 1950 1950 1950 1950 1950
Floor space mm 1900x1725 2350x1725 2900x1725 2450x1825 2900x1825
Net weight  kg 1950 2300 2700 2700 3000

 

 

 

 

  • (Option) A hydraulic overhead dresser is employed for column-traveling models, and is mounted on the spindle head to allow the wheel to be dressed independent of the grinding height or column position. The dresser device providers a minimum 0,01mm graduation for productivity and ease of operation.
  • The automatic lubrication system supplies lubricant to all of the guide ways and lead screws as the machine operates. This system ensures all the critical components are lubricated with the right amount of oil at all times.
  • The external independent hydraulic tank is located outside the machine to be easily accessible for maintenance. A specially-designed valve and proximity switches enable smooth table reversing This is also prevent heat and vibrations from being transferred to the machine base.
  • Electric components and function modules are well arranged and packed in a separated electric cabinet to be easily accessible for maintenance. An independent control box with an ergonomically designed panel offers a comfortable and convenient operation environment.

 

 

Inquiry Details
heavy duty precision planers

Heavy Duty Precision Planers

Heavy Duty Precision Planers

 

SIZES Ft.mm  4'1219 6'\1828 8'2438 12'3657 14'4267 16'4876
Length of Bed Ft. 6¼ 9¼ 12¼ 18¼ 21¼ 24¼
V's. mm 1905 2819 3733 5562 6477 7391
Length of Table Ft.
mm		 4½
1371		 6½
1981		 8½
2590		 12½
3810		 14½
4419		 16½
5029
Width of Table Inches
mm		 24"
609		 27''
685		 31''
787		 36''
914		 36''
914		 36''
914
Stroke of Table Ft.
mm		 4'
1219		 6'
1829      		 8' 
2438		 12'
3657		 14'
4267		 16'
4867
Planning Width Inches
mm		 30''
762  		 36''
914		 48''
1219		 60''
1524		 60'' 
1524		 60''    1524     
Height under  Inches 30'' 36'' 48'' 60'' 60'' 60''
Cross Rails mm 762 914 1219 1524 1524 1524
Cutting Speed PM Inches 410'' 410'' 410'' 410'' 410'' 410''
Return Speed PM Inches 610 610'' 610'' 610'[' 610'' 610''
Method of Driving  ELECRICAL BELT DRIVEN RACK & PINION
No. of tool posts 1 1 2 2 2 2 2
H.P. Requaired 2 3 5 71/2 71/2 71/2 10

 

Inquiry Details
heavy duty precision radial drilling machine

Heavy Duty Precision Radial Drilling Machine

Excellent qulity machine with 26 years of experience
Available in 3 models (i)40mm (ii) 50mm (iii) 65mm
Continious Quality control to achive high quality
All parts Manufactured in one roof facilities

Spindle running in a set 3 nos. best quality bearing which permit heavy duty applications.
9 nos. spindle speed (50 to 805 RPM)
Radial arm swivels 360 degree
Specialist in 65mm (Extra Heavy duty)
Double Column Pillar
Accuracy movement with in 12 micron
Gear made in EN-23 material.

Inquiry Details
c type power press

C Type Power Press

Rajesh brand mechanical Power Presses are coming in "C" frame versions from 3 tons to 250 tons capacity in most economical type of construction with sevral std./optional features such as manual/auto lubrication systems, knockouts electronics safety, Single/Double or Un-geared versions as also Pneuma

FRAME    : THE FRAME IS MADE OF STEEL CONSTRUCTION AND THEIR HEAVY CROSS SECTION AND RIGIDDESIGN ASSURE MINIMUM DEFLECTION AND ACCURATE ALIGNMENT CAST IRON LEGS WILL BE SUPPLIED UP TO 30 TON PRESS.

CRANK SHAFT    : CRANK SHAFT MATERIALS ARE MADE OF SPECIAL ALLOY STEEL TO WITHSTAND THE EFFECTIVE LOADSITTED IN BUSHER WITH HIGH ACCURACY.

GEARS & CLUTCH    : THE GEARS ARE MADE OF CAST STEEL OR FABRICATED AND IT TEETH ARE GENERATED BY HOBBING THE CLUTCH IS PROVIDED OF PIN / ROLLING KEY TYPE ALSO IT IS RIGID AND WELL SUPPORTED FOR THE MASS PRODUCTION CLUTCH CAN GIVES CONTINUOUS STROKE.

FLYWHEEL    : THE FLYWHEEL IS MADE OF HIGH GRADE CASTIRON AND IS BALANCED FOR STORNG AND RELEAS ING ADEQUATE ENERGY FOR THE PRESSING OPERATIONS.

LUBRICATION    : AN ACCURATE LUBRICTION SYSTEM HAS BEEN PROVED FOR LUBRICATIONS THE SLIDING SURFACE AND MOVING PARTS.

TABLE & RAM    : TABLE AND RAM ARE MADE OF HIGH GRADE HEAVY DUTY CAST IRON & PROPERLY SEASONED. THEY AREPERFACTLY
ALIGNED TO BACH OTHER TO OBTAIN HIGH ACCURACY & PRECISION PRESS OPERATION.

Description 3 Tons 5 Tons 10 Tons 10 Tons 20 Tons 20 Tons 30 Tons 30 Tons 50 Tons 50 Tons 75 Tons 100 Tons 150 Tons 200 Tons 250 Tons
Crank Shaft
Diameter		 38 51 60 60 76 76 83 83 105 105 121 134 152 158 165
Stroke
Adjustment		 2-25 6-25 6-25 6-51 13-51 13-76 13-63 13-76 13-76 13-102 13-115 13-127 13-152 13-158 13-165
Length & Width of Bed 203×152 305×178 381×255 381×255 508×305 508×305 558×356 558×356 750×520 750×520 863×596 914×635 965×685 1016×738 1016×778
Distance Bed
TO Ram		 127 153 205 205 280 280 292 292 406 406 483 483 495 519 544
Hole in Ram 19 25 25.4 25.4 32 32 38 38 38 38 45 51 57 63 63
Hole in Bed 51 63 76 76 83 83 89 89 127 127 152 178 191 216 229
Fly Wheel
Diameter		 330 405 435 435 550 550 660 660 810 810 910 1016 1118 1150 1320
Stroke Per Minute 85 85 75 75 60 60 60 60 55 55 50 45 40 30 30
 H.P.
Required		 0.5 0.5 1 1 2 2 3 3 5 5 7.5 10 15 20 25
Weight Approx
Kgs.		 150 275 500 500 1000 1000 1350 1350 2750 2750 4200 5500 6600 9000 11500

==> ALL DIMENSIONS ARE IN MM.

AS DAY TO DAY IMPROVEMENTS ARE CONTEMPATED FOR BETTER PERFORMANCE OF THE MACHINE. WE RESERVE THE RIGHTS TO ALTER THE SPECIFICATIONS WITHOUT PRIOR NOTICE


==> ALL THE POWER PRESSES COMBINE DURABILITY WITH DEPENDABILITY. YEARS OF EXPERIENCE IN MACHINERY HAS ENABLED US TO OFFER THE HIGHEST QUALITY MACHINE FOR ACCURACY WITH PRECISION AND HEAVY DUTY PER FORMANCE.

==> ACCLAIMED BY ACTUAL USERS, THE MACHINES ARE GAINING THE EVERGROWING POPULARITY IN THE FIELD AND NO WONDER THERFORE THAT MACHINES ARE BEING RECOMMANDED EVERYWHERE.

==> ALL THE MACHINES UNDERGO THROUGH CHECK-UP BY OUR EXPERT ENGINEERS BEFORE DESPATCH TO ENSURE THEIR SMOOTH AND TROUBLE FREE OPERATION.

==> WHATEVER RATE FIXED AT THE TIME OF DELIVERY WILL BE ACCEPTED.

NOTE : IN UNGEARD MACHINE 960 RPM AND IN SINGLE GEARED! DOUBLE GEARED 1440 RPM MOTOR TO USED.

 

Inquiry Details
horizontal boring machines

Horizontal Boring Machines

GURU NANAK Engineering Works(Regd.) with over 4 Decades' experience, have earned an enviable reputation as manufacturer of High Quality, Reliable & economical "KARAM" Highly Precision Horizontal Boring Machine which is a versatile Machine Tool for all types of roughing & finishing operations within the range of BORING, MILLING, DRILLING, REAMING & FACING. It is most suitable for machining bores in various types of Machine Bodies & Gear Boxes, for surface milling & especially for large dia flange facing. High precision workmanship, Sturdy & well proportionate design of Castings, High powered spindle & face plate drive along with Wide Range of Spindle Speeds & Gear Box Feeds ensure high production of accurately machined parts with the use of both H.S. Steel & Carbide tools. The Robust & Massive construction of the machine is a guarantee to withstand fully all the working stresses.
 
* The Casting is done with the mixture of 25% Steel & Ferro Chrome etc. to acquire proper Brinell     Hardness & it is also seasoned for at least six months. The Machine is manufactured to Grade-1     Limits of ACCURACY.
* High Accuracy of machining due to precision scrapped/ground Guideways of Bed & Pillars etc.
* Fine Positioning by Dial Indicatiors & Verniers or Digital Read-Out System having an accuracy of      .005 mm resolution for close manufacturing tolerances.
* Geometrical Accuracy of the machine conforms to Dr. SCHLESINGER'S ACCEPTANCE TEST CHART.
* Heavily ribbed box type Bed to withstand the Heavy Loads & Sturdy box type Columns to resist the    heavy cutting force even at elevated height.
* Precise Synchronized Vertical Travel of Head Stock & Boring Stay Support.
* All traverses of X,Y & Z Axis of the machine as well as circular movement of the Work Table are
   provided with automatic Feeds and Rapid Travels.
* All gears are precision cut on imported Mother Machinery to ensure smooth and Silent running.
* Manual Boring Head Height setting adjustment with a lever attached to feed gear box.
* Centralized control with swiveling Pendent Board for easy and convenient operations.
* Hand Operated knurled Knob attached to head stock drive motor and hand operated wheel    attached to feed gear box motor for the safest engagement of speeds and feeds respectively.
* Special Attachments like Threading, Milling and Taper Boring Attachments permit to perform Multi-
   Operations on a single machine.
* 4x90° Position of Rotary Table set with the help of an accurate adjustable stopper.
SAFETY CLUTCHES: To Disengage: ( a) Facing Mechanism (b) Sliding Mechanism of Cross Slide
(c) Rotary Movement of Work Table ( d) Longitudinal Movement of Work Spindle.

Apart from above safety Measures, Limit Switches & suitable Shear Pins are also provided for total safety of the machine

 

TECHNICAL SPECIFICATIONS

 

SPECIFICATIONS MM MM MM MM MM MM
             
1. Alloy Steel Work Spindle Handened &      Ground-Diameter 65 80 100 110 125 150
2. Morse Taper Number 4 5 6 6 6 Metric 80
3. Max. Longitudinal Movement of Working     Spindle 410 510 510 510 600 800
4. Number of Spindle Speeds 9 9 9 9 9 9
5. Range of Spindle Speeds - R.P.M. 20 to 300 15 to 300 15 to 300 15 to 250 15 to 250 15 to 250

6. Longitudinal Work Spindle Feeds (Nos.)

 9 9 9 9 9 9
7. Max. Height of the Spindle Axis
    from Table Surface		 800 925 1000 1100 1250 1500
8. Min. Height of the Spindle Axis
    from Table Surface		 20 25 35 35 35 50
9. Dimensions of the Rotary Table 880x1050 900x1125 1030x1375 1100x1450 1225x1675 1500x2000
10. Longitudinal Table Traverse 1500 1625 1775 1925 2050 2225
11. Long. Table Traverse Feeds
      ( Including one Rapid)		 10 10 10 10 15 15
12. Transversal Table Travel Feeds
      (Including one Rapid)		 10 10 10 10 15 15
13. Vertical Head Stock Travel Feeds
      (Including one Rapid)		 4 4 4 4 15 15
14. Rotary Table Autiomatic Feeds
      ( Including one Rapid)		 10 10 10 10 15 15
15. Max. Cross Movement of the Table 910 1000 1100 1300 1550 2000
16. Max. Distance Between Stay Bearing
      and Facing Head		 2150 2400 2690 2800 2950 3400
17. Facing Head Diameter 450 505 555 600 650 700
18. Weight Approximate in Kgs. 7500 8500 10000 11500 16500 20000

 

STANDARD EQUIPMENTS :

Two  Electric Motors :-  3 H.P.& 2 H.P. for 65mm H.B.M., 5 H.P. & 2 H.P. for 80mm H.B.M., 7.5 H.P. & 2 H.P. for 100mm H.B.M., 10 H.P. & 3 H.P. for 110mm H.B.M., 12.5 H.P. & 5 H.P. for 125mm H.B.M. & for 150mm H.B.M. 15 H.P. & 5 H.P. Electric Motors complete with Panel Board & Pendant Control Board.  One Facing Head with Single Point Tool Holder, 2 Nos. Lubrication Pumps, 5 Nos. Limit Switches, One Steel Telescopic Cover to guard the machine Bed,   One Machine Lamp, One Boring Bar, One Spindle Vibration Control Guide, Co-ordinate  reading  arrangement  with Scales & Verniers for X,Y and Z Axis along with Crank Handles are also supplied as Standard Equipments with every machine.

EXTRA EQUIPMENTS :

2Axis or 3Axis Digital Read-out System for the Pin-Point Accuracy, Angular D.R.O. System for the perfect indexing of Rotary Work Table, TURCITE coating for the anti-friction movements of all major sliding parts of the machine,  Vertical or Universal Milling Attachment, Taper Boring Attachment, Threading Attachment complete with special Threading Chuck, Revolving Centre with 6”/ 8” True Chuck, Three Nos. Dial  Indicators in dust proof Aluminium housings with attachments & Electric Coolant Pump etc. can be supplied as EXTRA EQUIPMENTS at their Net Extra Costs.

Inquiry Details
vertical turning cum boring mills

Vertical Turning Cum Boring Mills

TECHNICAL SPECIFICATIONS

 

SPECIFICATION UNIT VTL-1 VTL-1.2 VTL-1.5 VTL-2 VTL-2.5 VTL-3
               
Table Diameter mm   1000 1200 1500 2000

2500

 3000
Max. Turning Dia mm   1200 1350 1750 2250 2750 3250
Working Height Under Cross Rail mm   700 1000  1200 1500 1700 2000
Ram Heads on Cross Rail No.   One One One One One One
Vertical Travel of Ram Head mm   450 550 650 750 800 900
Swivel Angle of Ram Head Deg.   +/-35 +/-35 +/-35 +/-35 +/-35 +/-35
Table Speeds No.   6 6 6 6

6

 6
Range of Table Speeds RPM   9 to 90 9 to 90 9 to 90 5 to 50 3 to 30 3 to 30
Feeds for Horizontal & Vertical Travels No.   6 6 6 6 6 6
Range of Feeds, Horizontal & Vertical mm/min   1.5 to 9 1.5 to 9 1.5 to 9 1.5 to 9 0.5 to 5 0.5 to 5
Main Motor Drive H.P.   7.5 10 15  20 25 30
Motor for Vertical Travel of Cross Rail H.P.   2 2 2 3 3 5
Motor for Rapid Traverse H.P.   2 2 2 3 3 5

1. The machine is complete with Full Electricals & duly equipped with  Panel Board & Pendent Control Switch      Board for the centralized control.

2. Gear Box for Auto-Feed Ram Head both Vertical & Horizontal is provided.

3. Alloy Steel duly hardened Gears are used.

4. Phosphorus Bronze Nuts are used for Lead Screws

5. 2.5mm Thick Turcite-B Lining is used on RAM/SADDLE.

6. Forced Lubrication with a Motorized Lubrication Pump is provided for the main Rotary Table. Independent      Lubrication Pumps are provided for the Ram/Saddle  &  Cross Rail.

7. Precision Bearings and GUNMETAL guideways combination in the Bed/Table is provided to withstand Radial      &  Vertical Loads.

 

 

Inquiry Details
horizontal floor boring machines

Horizontal Floor Boring Machines

We have developed "KARAM" High Precision Horizontal FLOOR TYPE BORING MACHINE which is most suitable for very heavy & High Volume Jobs which can't be accommodated on the work table of conventional Horizontal Boring Machine. Such jobs can easily be handled with the Floor Boring Machine as the work-piece is kept on the Floor Plate/s provided separately with the machine. Additional ROTARY TABLE Attachment is also supplied as per customer's requirement. The design of machine is unique which ultimately provides stiffness, accuracy, precision and optimum output. The especially designed machine bed is wide enough to provide a very rigid base to the moving column. The geometrical accuracy of the machine conforms to Dr. Schlesinger's Acceptance Test Chart. The special feature of this machine is that a Variable Frequency Drive (AC DRIVE) is used for the Centralized Control of Vertical Movement of Head Stock as well as Horizontal Movement of Saddle carrying column. These infinitely variable speeds are further controlled by a potentiometer duly fitting the same on pendant board of the machine which also eliminates shifting of levers again & again. Centralized Lubrication System ensures proper lubrication to all the moving parts. Special Attachments like Milling Attachment, Threading Attachment and Taper Boring Attachments enable the machine to perform multi-operations. CNC Version of the machine can also be offered as per requirement.

 

TECHNICAL SPECIFICATIONS

 

SPECIFICATIONS MM MM MM MM
         
1. Alloy Steel Work Spindle Hardened &     Ground-Diameter 100 110 125 150
2. WORK SPINDLE TAPER M.T.6 or
ISO 50		 M.T.6 or
ISO 50		 M.T.6 or
ISO 50		 Metric 80
3. Longitudinal Movement of the Working     Spindle (Z – AXIS) 600 700 800 1000
4. Number of Spindle Speeds 9 9 9 9
5. Range of Spindle Speeds – R.P.M. 15  to 250 15 to 250 15 to 250  15 to 250
6. Vertical Travel of Head Stock  (Y – AXIS) 1 to 1.5 Mtrs. 1 to 1.75 Mtrs 1 to 2 Mtrs 1.5 to 2.5 Mtrs.
7. Horizontal Traverse of Column (X – AXIS) 2  to  8 Mtrs. 2  to  8 Mtrs 3  to 7 Mtrs. 3  to 7 Mtrs.
8. Facing Head Diameter 555 600 650  700
9. Radial Traverse of Facing Slide (U-AXIS) 150 150 180 200
10. Main Spindle Motor 7.5H.P. 10 H.P. 12.5H.P 15 H.P.
11. Feed Gear Box Motor 3H.P. 3H.P. 5 H.P. 5 H.P.
12. Rotary Table Attachment (Optional) 1000x1000 1250x1250 1500x1500 1500x2000
13. Sliding Movement of Rotary Table 800 900 1000 1250
14. Floor Plate/s (Optional) 1250x1250
x250		 1500x1500
x250		 2000x1500
x250		 2000x2000
x250

 

Inquiry Details
rotary linear work tables

Rotary Linear Work Tables

We have developed "KARAM" High Precision Horizontal FLOOR TYPE BORING MACHINE which is most suitable for very heavy & High Volume Jobs which can't be accommodated on the work table of conventional Horizontal Boring Machine.

 

ROTARY-LINEAR TABLE   KRLT-1 KRLT-1.5 KRLT-2
Main Dimensions & Capacities :        
Table Top – * Square                      mm 1000 x 1000 1500 x 1500 2000 x 2000
Number of T-Slots nos. 5 6 7
Size of T – Slots mm 19 19 19
Load Carry Capacity Kgs. 4000 6000 10000
Total Height, incl. Rotary Table    mm 750 750 800
Number of Guideways nos. 2 2 3
Traverse :        
*Sliding movement of Work Table mm 1000 1200 1500
Drive Data :        
Electric Motor H.P. 3 5 7.5
A.C. Drive H.P. 3 5 7.5
Linear Feed Rate with A.C. Drive mm/min 50 to 500 50 to 500 50 to 500
Rotary Movement for Positioning With Power Feed Yes Yes Yes
Accuracy :        
Positioning Accuracy With D.R.O. +/- 1 Minute +/- 1 Minute +/- 1 Minute
Positioning Accuracy Linear Axis mm 0.02 0.02 0.02

 

Inquiry Details
hand shearing machine rubber handle

Hand Shearing Machine Rubber Handle

We bring forth for our clients Hand Shearing Machines, which are outfitted with four edge blades and handle. These user friendly and precision engineered machines are utilized for cutting sheets, rounds, flats, angle, bar and other. Our range is available in different models for different works and capacities. The machines we offer our are widely acclaimed for delivering high operation efficiency in various conditions and fulfilling various requirements of diverse industries.

PARTICULARS

VIS 200(8”)

VIS 300(12”)

Vis 400(16”)

VIM 300(12”)

VIM 400(16”)

Blade Size

40 x 12

50 x 12

50 x 12

50 x 20

50 x 20

Plate Size of body

25 mm

28 mm

28 mm

40 mm

40 mm

Weight Aprx

27 kgs

40 kgs

70 kgs

75 kgs

98 kgs

Strole Length

145 mm

245 mm

345 mm

245 mm

345 mm

Cutting Capacity

1.5 to 2.0 mm

2.0 to 2.5 mm

2.0 to 2.5 mm

3.0 to 4.0 mm

3.0 to 3.5 mm

Cutting Edge

4 edge

4 edge

4 edge

2 edge + 4 edge

2 edge + 4 edge

Lubrication

AT ALL INDICATED POINTS

 

Inquiry Details
hand shearing machine nut cover

Hand Shearing Machine Nut Cover

We bring forth for our clients Hand Shearing Machines, which are outfitted with four edge blades and handle. These user friendly and precision engineered machines are utilized for cutting sheets, rounds, flats, angle, bar and other. Our range is available in different models for different works and capacities. The machines we offer our are widely acclaimed for delivering high operation efficiency in various conditions and fulfilling various requirements of diverse industries.

 

PARTICULARS

VIH 300(12”)

VIH  400(16”)

HYD 300(12”)

HYD 400(16”)

 

Blade Size

50 x 20

50 x 20

50 x 20

50 x 20

 

Plate Size of body

40 mm

40 mm

45 mm

45 mm

 

Weight Aprx

85 kgs

110 kgs

115 kgs

135 kgs

 

Strole Length

245 mm

345 mm

245 mm

345 mm

 

Cutting Capacity

3  to 4 mm

3 to 4 mm

5 to 6 mm

5 to 6 mm

 

Cutting Edge

2+ 4 edge

2+ 4 edge

2 + 4 edge

2 + 4 edge

 

Lubrication

AT ALL INDICATED POINTS

 

Inquiry Details
shaping machine cone pully belt with pillar

Shaping Machine Cone Pully Belt With Pillar

we offer the most innovative, reliable Jiwan all Geared & Cone Pulley  Shaping Machine with Automatic Lubrication system, ensuring full customer satisfaction. Leveraging our experience and expertise to provide revolutionary products, we have engaged ourselves in the manufacturing and export of high performance Shaping machines. Our Shaping machines are of sizes from 12"   18"   24"   30"   32"   36"   &   40".

SHAPING MACHINE 24" SPECIFICATION TABLE

CAPACITY

 Inches mm

Length of Ram Stroke

 24 610

Length of Ram

 50 1270

Length of Width of Ram Bearing

 33 x 11 ½ 838 x 292

Max & Minimum distance from table to Ram

 18 x 3 457 x 89

TABLE

    

Working surface of table

 24 x 14 610 x 356

Max Table Travel Horizontal

 24 610

Max Table Travel Vertical Angular Movement of Table on either sides

 15 381

TOOL HEAD

    

Max. Vertical Travel of Tool Slide

 6 152

Tool Head

 60º L  60º R

LENGTH OF MAIN SLIDE BASE

 36"

Length of Width of base

 64 x 23 1600 x 585

SPEED & FEEDS

    

Cone Pulley Belt

 4

Dia of Clutch Pulley

 12"

Range of Ram speeds

 4

Stroke per minute

 12, 24, 48, 72

Dia of Motor Pulley

 2 ¾ 70

Range of Table Feed per stroke of Ram

 0.009 0.229

Range of Tool Head feed

 Hand Feed

DRIVE & ELECTRICAL EQUIPMENTS

    

Electric Motor 3 H.P. C, P.B. and 5 H.P.A.G

2 H.P. CPB 3H.P. AG

Drive Motor

 1440 RPM

Main Switch Starter ( Push Button Type )

 5AMP

SPECIFICATION OF VICE OVERALL DIMENSIONS & WEIGHT

 12"

Length

 78 1981

Width

 43 1092

Height

 63 1600

Weight ( Approx. )

 2000 Kgs.

 

Inquiry Details
shaping machine all geared

Shaping Machine All Geared

we offer the most innovative, reliable Jiwan all Geared & Cone Pulley  Shaping Machine with Automatic Lubrication system, ensuring full customer satisfaction. Leveraging our experience and expertise to provide revolutionary products, we have engaged ourselves in the manufacturing and export of high performance Shaping machines. Our Shaping machines are of sizes from 12"   18"   24"   30"   32"   36"   &   40".

 

SHAPING MACHINE 24" SPECIFICATION TABLE

CAPACITY

 Inches mm

Length of Ram Stroke

 24 610

Length of Ram

 50 1270

Length of Width of Ram Bearing

 33 x 11 ½ 838 x 292

Max & Minimum distance from table to Ram

 18 x 3 457 x 89

TABLE

    

Working surface of table

 24 x 14 610 x 356

Max Table Travel Horizontal

 24 610

Max Table Travel Vertical Angular Movement of Table on either sides

 15 381

TOOL HEAD

    

Max. Vertical Travel of Tool Slide

 6 152

Tool Head

 60º L  60º R

LENGTH OF MAIN SLIDE BASE

 36"

Length of Width of base

 64 x 23 1600 x 585

SPEED & FEEDS

    

Cone Pulley Belt

 4

Dia of Clutch Pulley

 12"

Range of Ram speeds

 4

Stroke per minute

 12, 24, 48, 72

Dia of Motor Pulley

 2 ¾ 70

Range of Table Feed per stroke of Ram

 0.009 0.229

Range of Tool Head feed

 Hand Feed

DRIVE & ELECTRICAL EQUIPMENTS

    

Electric Motor 3 H.P. C, P.B. and 5 H.P.A.G

2 H.P. CPB 3H.P. AG

Drive Motor

 1440 RPM

Main Switch Starter ( Push Button Type )

 5AMP

SPECIFICATION OF VICE OVERALL DIMENSIONS & WEIGHT

 12"

Length

 78 1981

Width

 43 1092

Height

 63 1600

Weight ( Approx. )

 2000 Kgs.

 

Inquiry Details

Ashoktools Corporation

Ashok Bhavsar

12 Devdarshan Complex,GIDC Vatva Road,, Ahmedabad-382445

Gujarat (India)

Contact Us

Phone +91(79-25832167)

Mobile +91(9825033734) / (9426301306)

info@ashoktools.com